Omega Prime GUI
DISPLAY INTERFACE

Omega-Prime
Homepage
Omega-Prime
Observer's Manual
MPIA
Homepage

The image display portion of the GUI should also automatically start when the GUI is initialized.

File Menu: selects the basic display size. Color Menu: selects the color look-up table for displaying images. MagMode Menu: switches between the zoom window and a measurement of the image seeing. Pixel: When the cursor is on the image display window, the pixel position and counts in that pixel are displayed here.

Radius: Sets the radius of the small cursor box on the image display. See the above note on FWHM-log about measuring the seeing.

min/max: Show the minimum and maximum values of the pixels within the cursor box.

mean/dev: Shows the mean and standard deviation of the pixels within the cursor box.

FWHM/flx: Shows the FWHM and total flux (in counts) of an object selected with the cursor box.

First - + Last Controls the display of a series of images. Unless you need to review a set of images to determine, for example, whether the seeing was good enough to bother saving the data, just leave this on last.

BAD Toggles between displaying the bad pixels (in red) or not. Note that the bad pixels are ignored when determining display cuts only if the bad pixels are turned on.

Cuts Display stretch control. This button brings up a menu with various options for determining the minimum and maximum display levels. The options include: Min-Cut & Max-Cut: These windows show the current minimum and maximum levels used for the display. They will automatically update each time a new image is displayed except if using the "Cuts" option.

Single/Sum/Ave: Single will display each individual read as it comes off the camera. Sum will display the sum of all images taken in the current series. Average displays the average of all images taken in the current series.

Tele Provides for offsetting the telescope directly from the image display, which is useful for centering standard stars or science objects. Click on the "tele" button to get a green circle. Place this circle on some object on the display and click again. Move the cross which appears to where you want this object to be moved.

Movie Plays a movie of the series of exposures currently in memory.

Sky The "sky" button (small square) tells the computer to subtract a sky frame from the images before displaying, and is on when the square appears green. The file used for the sky frame is specified by name in the window to the left of the button.

Image shows which image in a series of repeated exposures that is currently being displayed.


Peter Bizenberger Dave Thompson
biz@mpia-hd.mpg.de djt@mpia-hd.mpg.de
Phone: +49 (6221) 528-311 Phone: +49 (6221) 528-224