Omega Prime GUI
INITIALIZATION WINDOW

Omega-Prime
Homepage
Omega-Prime
Observer's Manual
MPIA
Homepage

Observer: Specify the observer(s) in this window, without the use of spaces.

Camera: Select Omega Prime_IRL on the camera menu, which makes use of the Infrared Labs electronics. At some point in the future, we will be switching to a new set of electronics built at MPIA, but this is not currently available.

Camera-Optic: The Wide Field option should be selected under the optics menu. There is no other mode for Omega-Prime!

Status and Motors should both default to on.

Temp.Controller: Omega-Prime does not currently have a temperature controller.

Telescope: select CA3.5m for the telescope. This is the only telescope on which Omega-Prime is available.

Focal-Ratio: should be set to f/3.5, which is the prime focus of the 3.5m telescope.

Status: If the telescope is up and running, select on for the telescope status.

When you are satified with the selections, click on the OK button to initialize the GUI.


Peter Bizenberger Dave Thompson
biz@mpia-hd.mpg.de djt@mpia-hd.mpg.de
Phone: +49 (6221) 528-311 Phone: +49 (6221) 528-224